Step 3-layer segment cantilevered

Trittstufe 3-Schicht Segment freitragend - 38005

Article number: 38005-1100.01

€493.00/Stk

(less. 2% cash discount, €483.14/Stk)

Content: 1 piece

Prices incl. VAT plus shipping costs

Shipping weight: 5 kg

Delivery time 4-8 weeks

Type: STAIRS CANTILEVERED SEGMENT 4-SEITIG SICHTBAR F?LR GEWENDTE STUFEN Product info:... more

Close menu

Product information "Step 3-layer segment cantilevered"

Type:	STAIRS CANTILEVERED SEGMENT 4-SEITIG SICHTBAR F?LR GEWENDTE STUFEN
Product info:	The parquet AGENTUR TRITTSTUFE FREITRAGEND SEGMENT is visible on 4 sides, suitable for installation between stringers, can be combined with straight treads and is custom-made for you from your original parquet floor. Your parquet floor and your staircase are thus optimally matched to each other, as the colour tone, grading and surface harmonise perfectly. For the production of segment steps, we require exact measurements, or ideally natural measurement templates!
Format:	approx. 45-50 x 290 x 1100-1500mm (5% dimensional tolerance) approx. 50-55 x 290 x 1500-1800mm (5% dimensional tolerance) The specified step thickness is adapted to the carrying width for stability reasons. Standard depth 290mm, special depths and thicknesses (for example for wall-mounted systems) are available on request at an extra charge.
Construction:	Step manufactured from original parquet on distortion-free carrier material made of high-quality 3-layer boards in spruce. The edges of the stair profile are slightly rounded and re-oiled or re-varnished. Slight differences in the gloss level of re-oiled or re-varnished areas are possible.
Side finish:	Side finishes made of original parquet material can be selected at an extra charge.
Order unit:	1 piece
Installation:	Step treads are made of original parquet material, therefore the care guidelines of the respective parquet manufacturer must be observed. Room climate:
With regard to the room climate, the same guidelines apply to all original stair nosing profiles, step treads and skirting boards as to finished parquet. Care should be taken to maintain an even relative humidity of approx. 50-60%. Humidifiers should be used to ensure that the air humidity does not fall significantly below this level during the heating season.	Price:
The price per element depends on the length of the tread and the price of the parquet floor from which the treads are made. In order to avoid mistakes and misunderstandings, we will be happy to advise you by telephone when ordering treads and stair nosing profiles.

PARKETT-AGENTUR

Step 3-layer segment cantilevered

€493.00/Stk

incl. 20% VAT

excl. shipping costs

4-8 weeks

Art.Nr.: 38005-1100.01

Lenght:

1100mm 38005-1100.01 €493.00

1500mm 38005-1500.01 €496.00

1800mm 38005-1800.01 €497.00

price category:

1 38005-1100.01 €493.00

2 38005-1100.02 €613.00

3 38005-1100.03 €732.00

Type:	STAIRS CANTILEVERED SEGMENT 4-SEITIG SICHTBAR F?LR GEWENDTE STUFEN
Product info:	The parquet AGENTUR TRITTSTUFE FREITRAGEND SEGMENT is visible on 4 sides, suitable for installation between stringers, can be combined with straight treads and is custom-made for you from your original parquet floor. Your parquet floor and your staircase are thus optimally matched to each other, as the colour tone, grading and surface harmonise perfectly. For the production of segment steps, we require exact measurements, or ideally natural measurement templates!
Format:	approx. 45-50 x 290 x 1100-1500mm (5% dimensional tolerance) approx. 50-55 x 290 x 1500-1800mm (5% dimensional tolerance) The specified step thickness is adapted to the carrying width for stability reasons. Standard depth 290mm, special depths and thicknesses (for example for wall-mounted systems) are available on request at an extra charge.
Construction:	Step manufactured from original parquet on distortion-free carrier material made of high-quality 3-layer boards in spruce. The edges of the stair profile are slightly rounded and re-oiled or re-varnished. Slight differences in the gloss level of re-oiled or re-varnished areas are possible.
Side finish:	Side finishes made of original parquet material can be selected at an extra charge.
Order unit:	1 piece
Installation:	Step treads are made of original parquet material, therefore the care guidelines of the respective parquet manufacturer must be observed. Room climate:
With regard to the room climate, the same guidelines apply to all original stair nosing profiles, step treads and skirting boards as to finished parquet. Care should be taken to maintain an even relative humidity of approx. 50-60%. Humidifiers should be used to ensure that the air humidity does not fall significantly below this level during the heating season.	Price:
The price per element depends on the length of the tread and the price of the parquet floor from which the treads are made. In order to avoid mistakes and misunderstandings, we will be happy to advise you by telephone when ordering treads and stair nosing profiles.