Step 3-layer hollow straight

Trittstufe 3-Schicht hohl gerade - 38007

Article number: 38007-1100.01

€193.00/Stk

(less. 2% cash discount, €189.14/Stk)

Content: 1 piece

Prices incl. VAT plus shipping costs

Shipping weight: 5 kg

Delivery time 4-8 weeks

Type: STAIRS HOLLOW STRAIGHT Product info: The STEP STAGE HOHL GERADE is especially... more

Close menu

Product information "Step 3-layer hollow straight"

Type:	STAIRS HOLLOW STRAIGHT
Product info:	The STEP STAGE HOHL GERADE is especially suitable for covering stairs where only the thickness of the parquet material (approx. 15 to 20mm) has been taken into account and no wall serves as a border on the side, as this Typ allows compact and functional solutions to be designed for side borders (normal stair nosing profiles with borders cannot be used in this case). The step is custom-made for you from your original parquet floor. Your parquet floor and your staircase will be perfectly matched, as the colour, grading and surface harmonise perfectly.
Format:	approx. 45x290x1100/1500/1800mm (5% dimensional tolerance) Standard depth 290mm, special depths available on request at an extra charge.
Construction:	Step made from original parquet material. The visual effect corresponds to a normal 45mm step, but the material structure only corresponds to the thickness of the parquet material. The soffit of the step is covered at the front edge, as well as the lateral soffit and rear edge over 22mm when producing ends. The edges of the stair profile are slightly rounded and re-oiled or re-varnished. Slight differences in the gloss level of re-oiled or re-varnished areas are possible.
Side finish:	Side finishes made of original parquet material can be selected at an extra charge.
Order unit:	1 piece
Installation:	Stair treads are made of original parquet material, therefore the care guidelines of the respective parquet manufacturer must be observed.
Room climate:	With regard to the room climate, the same guidelines apply for all original stair nosing profiles, stair treads and skirting boards as for finished parquet. Ensure a uniform relative humidity of approx. 50-60%. To ensure that the air humidity does not fall significantly below this level during the heating period, humidifiers should be used.
Price:	The production of this article at the prices listed is only possible from 3-layer finished parquet with a minimum material thickness of 13.5 mm. Production from parquet material with a lower material thickness, for example from 10mm 2-layer prefabricated parquet, is only possible on request and for an additional charge due to the extra work involved. The price per element depends on the length of the step and the price of the parquet floor from which the steps are made. To avoid mistakes and misunderstandings, we are also happy to advise you by telephone when ordering treads and stair nosing profiles.

PARKETT-AGENTUR

Step 3-layer hollow straight

€193.00/Stk

incl. 20% VAT

excl. shipping costs

4-8 weeks

Art.Nr.: 38007-1100.01

Lenght:

1100mm 38007-1100.01 €193.00

1500mm 38007-1500.01 €217.00

1800mm 38007-1800.01 €220.00

price category:

1 38007-1100.01 €193.00

2 38007-1100.02 €247.00

3 38007-1100.03 €320.00

Type:	STAIRS HOLLOW STRAIGHT
Product info:	The STEP STAGE HOHL GERADE is especially suitable for covering stairs where only the thickness of the parquet material (approx. 15 to 20mm) has been taken into account and no wall serves as a border on the side, as this Typ allows compact and functional solutions to be designed for side borders (normal stair nosing profiles with borders cannot be used in this case). The step is custom-made for you from your original parquet floor. Your parquet floor and your staircase will be perfectly matched, as the colour, grading and surface harmonise perfectly.
Format:	approx. 45x290x1100/1500/1800mm (5% dimensional tolerance) Standard depth 290mm, special depths available on request at an extra charge.
Construction:	Step made from original parquet material. The visual effect corresponds to a normal 45mm step, but the material structure only corresponds to the thickness of the parquet material. The soffit of the step is covered at the front edge, as well as the lateral soffit and rear edge over 22mm when producing ends. The edges of the stair profile are slightly rounded and re-oiled or re-varnished. Slight differences in the gloss level of re-oiled or re-varnished areas are possible.
Side finish:	Side finishes made of original parquet material can be selected at an extra charge.
Order unit:	1 piece
Installation:	Stair treads are made of original parquet material, therefore the care guidelines of the respective parquet manufacturer must be observed.
Room climate:	With regard to the room climate, the same guidelines apply for all original stair nosing profiles, stair treads and skirting boards as for finished parquet. Ensure a uniform relative humidity of approx. 50-60%. To ensure that the air humidity does not fall significantly below this level during the heating period, humidifiers should be used.
Price:	The production of this article at the prices listed is only possible from 3-layer finished parquet with a minimum material thickness of 13.5 mm. Production from parquet material with a lower material thickness, for example from 10mm 2-layer prefabricated parquet, is only possible on request and for an additional charge due to the extra work involved. The price per element depends on the length of the step and the price of the parquet floor from which the steps are made. To avoid mistakes and misunderstandings, we are also happy to advise you by telephone when ordering treads and stair nosing profiles.