Hydro-Vinyl Rigid natural oak, lightly brushed, ultra-matt

Special offer

Vinyl

Produkt vor Ort erleben

Article number: 44601-5229

To 59m² €31,90/m²

60 - 119m² €28,90/m²

from 120m² €25,90/m²

You save -42%

From €71.46/Pkt.

1 Pkt. = 2.24 m²

From €25,90/m²

(less. 2% cash discount, €31.26/m²)

instead of RRP* €44,90/m²

Prices incl. VAT plus shipping costs

Delivery time 5-25 weeks

Article number: 44601-5229

Type: HYDRO-Rigid finished floor Design: OAK Assortment: Lively, natural differences in... more

Close menu

Product information "Hydro-Vinyl Rigid natural oak, lightly brushed, ultra-matt"

Type:	HYDRO-Rigid finished floor
Design:	OAK
Assortment:	Lively, natural differences in color and structure, knots and filled knots, drying cracks, mirror typical of oak.
Surface:	LIGHTLY BRUSHED ULTRAMATT
Wear layer:	approx. 0.3mm
Format:	5x229x1200mm
Type of construction:	Waterproof Hydro-Rigid carrier board, moisture-resistant footfall sound insulation, hard-wearing UV Coated surface, click system, micro bevel.
Order unit:	2.24m²
Planks per package:	8 Planks
Technical data:	Use class: living area class 23 / commercial area class 32 - EN 16511 Area weight: 7,500g/m² - ISO 23997:2007 Heat transfer resistance: approx. 0.038m² K/W - EN 125767 Suitability for castors: Type W - EN 425 Lightfastness: >6 ISO 105 Slip resistance: R 9 - EN 51130
Laying:	We generally recommend full-surface gluing with MUREXIN D495 parquet adhesive on screed ready for laying. In the case of floating installation, a vapor barrier PE film should be used. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guideline for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers. The guidelines and installation instructions are available for download at www.parkett-agentur.at.
Underfloor heating:	Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on hot water underfloor heating should not exceed 26°C. ;
Room climate:	To maintain value and dimensional stability, you should ensure a constant relative humidity of approx. 50-60% at an average room temperature of approx. 20 degrees. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:	Prices depend on the order quantity. The best price listed is valid from 100m².
Note:	Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Color changes or material warping)

DESIGNFLOOR

Hydro-Vinyl Rigid natural oak, lightly brushed, ultra-matt

To 59m² €31,90/m²

60 - 119m² €28,90/m²

from 120m² €25,90/m²

From €25,90/m²

(less. 2% cash discount, €31.26/m²)

instead of RRP* €44,90/m²

You save -42%

( 2.24 m² / Pkt. )

incl. 20% VAT

excl. shipping costs

5-25 weeks

Art.Nr.: 44601-5229

Format:

5x229x1220mm 44601-5229 from€25.90

Type:	HYDRO-Rigid finished floor
Design:	OAK
Assortment:	Lively, natural differences in color and structure, knots and filled knots, drying cracks, mirror typical of oak.
Surface:	LIGHTLY BRUSHED ULTRAMATT
Wear layer:	approx. 0.3mm
Format:	5x229x1200mm
Type of construction:	Waterproof Hydro-Rigid carrier board, moisture-resistant footfall sound insulation, hard-wearing UV Coated surface, click system, micro bevel.
Order unit:	2.24m²
Planks per package:	8 Planks
Technical data:	Use class: living area class 23 / commercial area class 32 - EN 16511 Area weight: 7,500g/m² - ISO 23997:2007 Heat transfer resistance: approx. 0.038m² K/W - EN 125767 Suitability for castors: Type W - EN 425 Lightfastness: >6 ISO 105 Slip resistance: R 9 - EN 51130
Laying:	We generally recommend full-surface gluing with MUREXIN D495 parquet adhesive on screed ready for laying. In the case of floating installation, a vapor barrier PE film should be used. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guideline for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers. The guidelines and installation instructions are available for download at www.parkett-agentur.at.
Underfloor heating:	Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on hot water underfloor heating should not exceed 26°C. ;
Room climate:	To maintain value and dimensional stability, you should ensure a constant relative humidity of approx. 50-60% at an average room temperature of approx. 20 degrees. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:	Prices depend on the order quantity. The best price listed is valid from 100m².
Note:	Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Color changes or material warping)