Hydro-Vinyl raw oak synchronized pore

Vinyl

Article number: 44605-55230

To 59m² €50,50/m²

60 - 119m² €47,50/m²

from 120m² €44,50/m²

From €44,50/m²

(less. 2% cash discount, €49.49/m²)

instead of RRP* €55,70/m²

You save -20%

Content: 1.99 m²

Prices incl. VAT plus shipping costs

Delivery time 1-2 weeks

Persönliches Angebot anfordern

Ich bitte um ein unverbindliches Angebot zu Hydro-Vinyl raw oak synchronized pore inkl. passendem Zubehör.
Wir empfehlen die Angabe aller Daten, um die Bearbeitung Ihrer Anfrage zu erleichtern.

Article number: 44605-55230

Type: HYDRO-Vinyl finished floor Design: OAK Assortment: Lively, clear differences in... more

Close menu

Product information "Hydro-Vinyl raw oak synchronized pore"

Type:	HYDRO-Vinyl finished floor
Design:	OAK
Assortment:	Lively, clear differences in color and structure, knots and filled knots, drying cracks, oak-typical mirror.
Surface:	SYNCHRONPORE - authentic surface embossing
Use layer:	approx. 0.3mm
Format:	5 ,5x230x1235mm
Type of construction:	Waterproof hydro-carrier board, elastic intermediate layer, moisture-resistant impact sound insulation, hard-wearing PU-coated surface, Uniclic system, without bevel.
Order unit:	1.99m²
Planks per package:	7 planks
Technical data:	Use class: living area cl. 23 / commercial area cl. 32 - EN 16511 area weight: 6,000g/m² - EN 430 heat transfer resistance: approx. 0.05m² K/W - EN 12524 chair castor suitability: typ W - EN 425 Light fastness: 6/7 ISO 105 Slip resistance: R 10 - EN 51130
Laying:	We generally recommend full-surface gluing with MUREXIN D495 parquet adhesive on screed ready for laying. In the case of floating installation, a vapor barrier PE film should be used. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guideline for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers. The guidelines and installation instructions are available for download at www.parkett-agentur.at.
Underfloor heating:	Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on hot water underfloor heating should not exceed 26°C. ;
Room climate:	To maintain value and dimensional stability, you should ensure a constant relative humidity of approx. 50-60% at an average room temperature of approx. 20 degrees. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:	Prices depend on the order quantity. The best price listed is valid from 100m².
Note:	Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material (changes in color or warping of the material). Laying in conservatories is not recommended.

DESIGNFLOOR