HDF Vinyl Oak umbra

Vinyl

Article number: 44526-85230

To 59m² €44,80/m²

60 - 119m² €41,80/m²

from 120m² €38,80/m²

From €38,80/m²

(less. 2% cash discount, €43.90/m²)

instead of RRP* €52,10/m²

You save -25%

( 1.99 m² / Pkt. )

Prices incl. VAT plus shipping costs

Delivery time on request

Article number: 44526-85230

Type: HDF vinyl finished floor Design: OAK Assortment: Very lively, clear... more

Close menu

Product information "HDF Vinyl Oak umbra"

tr> td>Highly compressed, low-swelling HDF board with pressed cork backing, hard-wearing PU-coated surface, Uniclic system, without bevel.

Type:	HDF vinyl finished floor
Design:	OAK
Assortment:	Very lively, clear color & Differences in structure, knots and knots that have been puttied, drying cracks, oak-typical mirror.
Surface:	LIGHTLY BRUSHED, SAWN
Wear layer:	approx. 0.3mm
Format:	8.5x230x1235mm
Type of construction:
Order unit:	1 ,99m²
Planks per package:	7 planks
Technical data:	Use class: residential area class 23 / commercial area class 32 - EN 16511 area weight: 8,100g/m² - EN 430 heat transfer resistance: approx. 0.08m² K/W - EN 12524 suitability for castors: Type W - EN 425 Lightfastness: 6/7 ISO 105 Slip resistance: R 10 - EN 51130
Installation:	HDF- Vinyl floors are approved for floating installation. Full-surface adhesion to the substrate is not approved. HDF-Vinyl finished floors are already delivered with a laminated impact sound insulation made of cork - no further impact sound insulation is required. On all mineral substrates to use a vapor barrier in the form of a vinyl underlay film PE FILM. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guidelines for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers.
Underfloor heating:	Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on hot water underfloor heating should not exceed 26°C attention should be paid to an even relative humidity of approx. 50-60% with average room temperatures of approx. 20 degrees. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:	Prices depend on the order quantity. The best price listed is valid from 100m².
Note:	Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.

DESIGNFLOOR

HDF Vinyl Oak umbra

To 59m² €44,80/m²

60 - 119m² €41,80/m²

from 120m² €38,80/m²

From €38,80/m²

(less. 2% cash discount, €43.90/m²)

instead of RRP* €52,10/m²

You save -25%

( 1.99 m² / Pkt. )

incl. 20% VAT

excl. shipping costs

Delivery time on request

Art.Nr.: 44526-85230

Format:

8,5x230x1235mm 44526-85230 from€38.80

td>Highly compressed, low-swelling HDF board with pressed cork backing, hard-wearing PU-coated surface, Uniclic system, without bevel.

tr>

Type:	HDF vinyl finished floor
Design:	OAK
Assortment:	Very lively, clear color & Differences in structure, knots and knots that have been puttied, drying cracks, oak-typical mirror.
Surface:	LIGHTLY BRUSHED, SAWN
Wear layer:	approx. 0.3mm

Format:

8.5x230x1235mm

Type of construction:

Order unit:

1 ,99m²

Planks per package:

7 planks

Technical data:

Use class: residential area class 23 / commercial area class 32 - EN 16511
area weight: 8,100g/m² - EN 430
heat transfer resistance: approx. 0.08m² K/W - EN 12524
suitability for castors: Type W - EN 425
Lightfastness: 6/7 ISO 105
Slip resistance: R 10 - EN 51130

Installation:

HDF- Vinyl floors are approved for floating installation. Full-surface adhesion to the substrate is not approved. HDF-Vinyl finished floors are already delivered with a laminated impact sound insulation made of cork - no further impact sound insulation is required. On all mineral substrates to use a vapor barrier in the form of a vinyl underlay film PE FILM. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guidelines for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers.

Underfloor heating:

Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on hot water underfloor heating should not exceed 26°C attention should be paid to an even relative humidity of approx. 50-60% with average room temperatures of approx. 20 degrees. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.

Graduated price:

Prices depend on the order quantity. The best price listed is valid from 100m².

Note:

Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.