HDF Vinyl Monte Sasso cream sandblasted

Vinyl

Article number: 44555-10450

To 59m² €53,70/m²

60 - 119m² €50,70/m²

from 120m² €47,70/m²

You save -22%

From €89.68/Pkt.

1 Pkt. = 1.67 m²

From €47,70/m²

(less. 2% cash discount, €52.63/m²)

instead of RRP* €61,70/m²

Prices incl. VAT plus shipping costs

Delivery time 1-2 weeks

Article number: 44555-10450

Type: Hydro-Vinyl finished floor Design: STONE DECOR Assortment: Lively,... more

Close menu

Product information "HDF Vinyl Monte Sasso cream sandblasted"

Type:	Hydro-Vinyl finished floor
Design:	STONE DECOR
Assortment:	Lively, natural color & Structural differences.
Surface:	SAND BLASTED
Wear layer:	approx . 0.55mm
Format:	10x450x620mm
Type of construction:	Highly compressed, low-swelling HDF board with pressed cork backing, hard-wearing PU-coated surface, Uniclic system, bevelled.
Order unit:	1.67m² /td>
Planks per package:	6 planks
Technical data:	Stress class: residential area class 23 / commercial area class 33 - EN 16511 surface weight: 6,200g/m² - EN 430 heat transfer resistance: approx. 0.05m² K/W - EN 12524 suitability for castors: type W - EN 425 Lightfastness: 6/7 ISO 105 Slip resistance: R 10 - EN 51130
Laying:	We generally recommend full-surface installation Bonding with MUREXIN D495 parquet adhesive on ready-to-lay screed. In the case of floating installation, a vapor barrier PE film should be used. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guideline for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers. The guidelines and installation instructions are available under Downloads.
Underfloor heating:	Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on warm water underfloor heating should not exceed 26°C.
Room climate:	For value retention and dimensional stability, an even relative humidity of approx. 50-60% with average room temperatures of approx. 20 degrees must be observed. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:	Prices depend on the order quantity. The best price listed is valid from 100m².
Note:	Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.

DESIGNFLOOR

HDF Vinyl Monte Sasso cream sandblasted

To 59m² €53,70/m²

60 - 119m² €50,70/m²

from 120m² €47,70/m²

From €47,70/m²

(less. 2% cash discount, €52.63/m²)

instead of RRP* €61,70/m²

You save -22%

( 1.67 m² / Pkt. )

incl. 20% VAT

excl. shipping costs

1-2 weeks

Art.Nr.: 44555-10450

Format:

10x450x620mm 44555-10450 from€47.70

Type:	Hydro-Vinyl finished floor
Design:	STONE DECOR
Assortment:	Lively, natural color & Structural differences.
Surface:	SAND BLASTED
Wear layer:	approx . 0.55mm
Format:	10x450x620mm
Type of construction:	Highly compressed, low-swelling HDF board with pressed cork backing, hard-wearing PU-coated surface, Uniclic system, bevelled.
Order unit:	1.67m² /td>
Planks per package:	6 planks
Technical data:	Stress class: residential area class 23 / commercial area class 33 - EN 16511 surface weight: 6,200g/m² - EN 430 heat transfer resistance: approx. 0.05m² K/W - EN 12524 suitability for castors: type W - EN 425 Lightfastness: 6/7 ISO 105 Slip resistance: R 10 - EN 51130
Laying:	We generally recommend full-surface installation Bonding with MUREXIN D495 parquet adhesive on ready-to-lay screed. In the case of floating installation, a vapor barrier PE film should be used. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guideline for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers. The guidelines and installation instructions are available under Downloads.
Underfloor heating:	Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on warm water underfloor heating should not exceed 26°C.
Room climate:	For value retention and dimensional stability, an even relative humidity of approx. 50-60% with average room temperatures of approx. 20 degrees must be observed. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:	Prices depend on the order quantity. The best price listed is valid from 100m².
Note:	Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.