HDF vinyl brown oak synchronous pore

HDF-Vinyl Brauneiche Synchronpore - 44507

Article number: 44507-98230

To 59m² €49,40/m²

60 - 119m² €46,40/m²

from 120m² €43,40/m²

From €43,40/m²

(less. 2% cash discount, €48.41/m²)

instead of RRP* €54,50/m²

You save -20%

( 1.7 m² / Pkt. )

Prices incl. VAT plus shipping costs

Delivery time on request

Persönliches Angebot anfordern

Ich bitte um ein unverbindliches Angebot zu HDF vinyl brown oak synchronous pore inkl. passendem Zubehör.
Wir empfehlen die Angabe aller Daten, um die Bearbeitung Ihrer Anfrage zu erleichtern.

Article number: 44507-98230

Type: HDF vinyl finished floor Design: OAK Assortment: Lively, natural differences in... more

Close menu

Product information "HDF vinyl brown oak synchronous pore"

Type:	HDF vinyl finished floor
Design:	OAK
Assortment:	Lively, natural differences in color and structure, knots and filled knots, drying cracks, typical oak finish.
Surface:	SYNCHRONPORE authentic surface embossing
wear layer:	approx. 0.3mm
Format:	9.8x230x1235mm
Type of construction:	Highly compressed, swelling-reduced HDF board with pressed cork backing, hard-wearing PU Coated surface, Uniclic system, without bevel.
Order unit:	1.70m²
Planks per package:	6 planks
Technical data:	Use class: living area cl. 23 / commercial area cl. 32 - EN 16511 area weight: 8,100g/m² - EN 430 heat transfer resistance: approx. 0.08m² K /W - EN 12524 Chair caster suitability: Type W - EN 425 Lightfastness: 6/7 ISO 105 Slip resistance: R 10 - EN 51130
Installation:	HDF vinyl floors are approved for floating installation. Full-surface adhesion to the substrate is not approved. HDF-Vinyl finished floors are already delivered with a laminated impact sound insulation made of cork - no further impact sound insulation is required. On all mineral substrates; to use a vapor barrier in the form of a vinyl underlay film PE FILM. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guideline for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers.
Underfloor heating:	Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on hot water underfloor heating should not exceed 26°C. ;
Room climate:	To maintain value and dimensional stability, you should ensure a constant relative humidity of approx. 50-60% at an average room temperature of approx. 20 degrees. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:	Prices depend on the order quantity. The best price listed is valid from 100m².
Note:	Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.

DESIGNFLOOR