DESIGNFLOOR
Hydro Vinyl Monte Sasso Cream Sandblasted
Hydro-Vinyl Monte Sasso Creme sandgestrahlt - 44655
DESIGNFLOOR

Hydro Vinyl Monte Sasso Cream Sandblasted

Article number: 44655-57450
To 49 €54,60/m²
50 - 99 €51,60/m²
from 100 €48,60/m²
From €48,60/m²
(less. 2% cash discount, €53.51/m²)
instead of RRP* €57,54/m²
You save -15%
( 1.95 m² / Pkt. )

Prices incl. VAT plus shipping costs

Shipping weight: 6,28 kg

Delivery time 1-2 weeks

Format:

  • Please select the order quantity as a whole number.

QUANTITY in m² (1 Pkt.):

Zwischensumme:

  • 44655-57450
  • {ART_FF.FELD3}
Type: Hydro-Vinyl finished floor Design: STONE DECOR Assortment: Lively,... more

Product information "Hydro Vinyl Monte Sasso Cream Sandblasted"

td>Waterproof hydro core board, elastic intermediate layer, moisture-resistant impact sound insulation, hard-wearing PU-coated surface, Uniclic system, micro bevel. td>Use class: living area cl. 23 / commercial area cl. 33 - EN 16511
area weight: 6,200g/m² - EN 430
heat transfer resistance: approx. 0.05m² K/W - EN 12524
chair castor suitability: typ W - EN 425
Lightfastness: 6/7 ISO 105
Slip resistance: R 10 - EN 51130
Type:Hydro-Vinyl finished floor
Design:STONE DECOR
Assortment:Lively, natural color & Structural differences.
Surface:SAND BLASTED
Wear layer:approx . 0.55mm
Format:5.7x450x620mm
Type of construction:
Order unit:1, 95m²
Planks per package:7 planks
Technical data:
Installation:We generally recommend full-surface bonding with MUREXIN D495 parquet adhesive on ready-to-lay screed. In the case of floating installation, a vapor barrier PE film should be used. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guideline for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers. The guidelines and installation instructions are available under Downloads.
Underfloor heating:Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on warm water underfloor heating should not exceed 26°C.
Room climate:For value retention and dimensional stability, an even relative humidity of approx. 50-60% with average room temperatures of approx. 20 degrees must be observed. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:Prices depend on the order quantity. The best price listed is valid from 100m².
Note:Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.
Logo ONLINE | WIEN | TIROL

T: +43 (0)59 6814 0 | F: +43 (0)59 6814 99
info@parkett-agentur.com | www.parkett-agentur.com
Übersetzt mit www.DeepL.com/Translator (kostenlose Version)
DESIGNFLOOR

Hydro Vinyl Monte Sasso Cream Sandblasted

To 49 €54,60/m²
50 - 99 €51,60/m²
from 100 €48,60/m²
From €48,60/m²
(less. 2% cash discount, €53.51/m²)
instead of RRP* €57,54/m²
You save -15%
( 1.95 m² / Pkt. )
incl. 20% VAT
excl. shipping costs

1-2 weeks

Art.Nr.: 44655-57450

Format:
5,7x450x620mm 44655-57450 from€48.60

DESIGNFLOOR CE-Kennzeichnung
td>Use class: living area cl. 23 / commercial area cl. 33 - EN 16511
area weight: 6,200g/m² - EN 430
heat transfer resistance: approx. 0.05m² K/W - EN 12524
chair castor suitability: typ W - EN 425
Lightfastness: 6/7 ISO 105
Slip resistance: R 10 - EN 51130
td>Waterproof hydro core board, elastic intermediate layer, moisture-resistant impact sound insulation, hard-wearing PU-coated surface, Uniclic system, micro bevel.
Type:Hydro-Vinyl finished floor
Design:STONE DECOR
Assortment:Lively, natural color & Structural differences.
Surface:SAND BLASTED
Wear layer:approx . 0.55mm
Format:5.7x450x620mm
Type of construction:
Order unit:1, 95m²
Planks per package:7 planks
Technical data:
Installation:We generally recommend full-surface bonding with MUREXIN D495 parquet adhesive on ready-to-lay screed. In the case of floating installation, a vapor barrier PE film should be used. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guideline for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers. The guidelines and installation instructions are available under Downloads.
Underfloor heating:Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on warm water underfloor heating should not exceed 26°C.
Room climate:For value retention and dimensional stability, an even relative humidity of approx. 50-60% with average room temperatures of approx. 20 degrees must be observed. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:Prices depend on the order quantity. The best price listed is valid from 100m².
Note:Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.
Viewed