DESIGNFLOOR
HDF Vinyl Lotus oak
DESIGNFLOOR

HDF Vinyl Lotus oak

Article number: 44527-85230
To 49 €44,80/m²
50 - 99 €41,80/m²
from 100 €38,80/m²
From €38,80/m²
(less. 2% cash discount, €43.90/m²)
instead of RRP* €50,65/m²
You save -23%
( 1.99 m² / Pkt. )

Prices incl. VAT plus shipping costs

Delivery time on request

Format:

  • Please select the order quantity as a whole number.

QUANTITY in m² (1 Pkt.):

Zwischensumme:

  • 44527-85230
  • {ART_FF.FELD3}
Type: HDF vinyl finished floor Design: OAK Assortment: Very lively, clear... more

Product information "HDF Vinyl Lotus oak"

td>Highly compressed, low-swelling HDF board with pressed cork backing, hard-wearing PU-coated surface, Uniclic system, without bevel.
Type:HDF vinyl finished floor
Design:OAK
Assortment:Very lively, clear color & Differences in structure, knots and knots that have been puttied, drying cracks, typical oak look.
Surface:BRUSHED, SAWN
Wear layer:approx. 0.3mm
Format:8.5x230x1235mm
Type of construction:
Order unit:1 ,99m²
Planks per package:7 planks
Technical data: Use class: residential area class 23 / commercial area class 32 - EN 16511
area weight: 8,100g/m² - EN 430
heat transfer resistance: approx. 0.08m² K/W - EN 12524
suitability for castors: Type W - EN 425
Lightfastness: 6/7 ISO 105
Slip resistance: R 10 - EN 51130
Installation:HDF- Vinyl floors are approved for floating installation. Full-surface adhesion to the substrate is not approved. HDF-Vinyl finished floors are already delivered with a laminated impact sound insulation made of cork - no further impact sound insulation is required. On all mineral substrates  to use a vapor barrier in the form of a vinyl underlay film PE FILM. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guidelines for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers.
Underfloor heating:Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on hot water underfloor heating should not exceed 26°C attention should be paid to an even relative humidity of approx. 50-60% with average room temperatures of approx. 20 degrees. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:Prices depend on the order quantity. The best price listed is valid from 100m².
Note:Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.
Logo ONLINE | WIEN | TIROL

T: +43 (0)59 6814 0 | F: +43 (0)59 6814 99
info@parkett-agentur.com | www.parkett-agentur.com
Übersetzt mit www.DeepL.com/Translator (kostenlose Version)
DESIGNFLOOR

HDF Vinyl Lotus oak

To 49 €44,80/m²
50 - 99 €41,80/m²
from 100 €38,80/m²
From €38,80/m²
(less. 2% cash discount, €43.90/m²)
instead of RRP* €50,65/m²
You save -23%
( 1.99 m² / Pkt. )
incl. 20% VAT
excl. shipping costs

Delivery time on request

Art.Nr.: 44527-85230

Format:
8,2x230x1235mm 44527-85230 from€38.80

DESIGNFLOOR CE-Kennzeichnung
td>Highly compressed, low-swelling HDF board with pressed cork backing, hard-wearing PU-coated surface, Uniclic system, without bevel.
Type:HDF vinyl finished floor
Design:OAK
Assortment:Very lively, clear color & Differences in structure, knots and knots that have been puttied, drying cracks, typical oak look.
Surface:BRUSHED, SAWN
Wear layer:approx. 0.3mm
Format:8.5x230x1235mm
Type of construction:
Order unit:1 ,99m²
Planks per package:7 planks
Technical data: Use class: residential area class 23 / commercial area class 32 - EN 16511
area weight: 8,100g/m² - EN 430
heat transfer resistance: approx. 0.08m² K/W - EN 12524
suitability for castors: Type W - EN 425
Lightfastness: 6/7 ISO 105
Slip resistance: R 10 - EN 51130
Installation:HDF- Vinyl floors are approved for floating installation. Full-surface adhesion to the substrate is not approved. HDF-Vinyl finished floors are already delivered with a laminated impact sound insulation made of cork - no further impact sound insulation is required. On all mineral substrates  to use a vapor barrier in the form of a vinyl underlay film PE FILM. With regard to requirements for the screed, subsurface preparation or screed compensation, the current parquet AGENCY laying instructions must be taken into account. For professional moisture measurement, we refer to the currently valid guidelines for determining the moisture in screeds of the permanent expert committee of the federal professional group of floor layers.
Underfloor heating:Suitable for hot water underfloor heating. According to generally applicable guidelines, the maximum surface temperature of the floor on hot water underfloor heating should not exceed 26°C attention should be paid to an even relative humidity of approx. 50-60% with average room temperatures of approx. 20 degrees. To ensure that the recommended air humidity is not significantly undercut during the heating period, an air humidifier should be used if necessary! Sufficient shading is also recommended.
Graduated price:Prices depend on the order quantity. The best price listed is valid from 100m².
Note:Severe temperature fluctuations, extreme solar radiation can have an unfavorable effect on the material. (Changes in color or warping of the material). Laying in conservatories is not recommended.
Viewed